ROADGUARD/2^®

Terrain Barrier

Stronger ... lighter ... and costs less than all other jersey-style barriers!

NEW BLOW-MOLD TECHNOLOGY AND HIGH-DENSITY POLYETHYLENE MAKE ROADGUARD/2 THE BIGGEST ADVANCE IN PORTABLE BARRIERS SINCE INCEPTION

Only 85 lbs. empty, but a secure 1600 lbs. when filled with water, the tough and versatile ROADGUARD/2 High-Density Polyethylene Terrain Barrier is the most advanced portable, waterballasted, energy-absorbing plastic barrier on the market. Perfect for work zone protection, traffic channeling and control, lane delineation, crowd control, parking areas, building security, and police and fire security, these easy-to-handle, quick-to-install portable barriers are ideal for Federal, state, county and municipal governments, military installations, utilities, airports, bridges, parking authorities, sports venues, and entertainment facilities.

ROADGUARD/2 OUTPERFORMS LOW-DENSITY BARRIERS

Because High-Density polyethylene is 2-1/2 times stronger than Low-Density polyethylene, it is now practical, using new advances in blow-mold technology, to manufacture a barrier that is lighter in weight, yet still stronger than a rotationally molded, Low-Density plastic, Jersey-style barrier.

The result is the ROADGUARD/2 — an 85 lb. double-chambered portable barrier that is easily handled and deployed, and produced at significantly less cost than competitive rotationally molded barriers.

*Tensile Strength - The pulling strength required to break a given specimen.
Flexural Strength - The tensile stress of the outermost fibers of a bent test sample at the instant of failure. Flexural Modulus - A measure of the strain imposed in the outermost fibers of a bent specimen.

ROADGUARD/2 STATE-OF-THE-ART DESIGN FEATURES

Using new blow-mold technology, the ROADGUARD/2 is a double-chambered, 85 lb. barrier that is stronger and lighter than all competitive Jersey-style barriers. The two chambers are structurally interlocked and brass-bolted together with four strong structural foam-molded polyolefin lugs. The double chamber provides two vertical walls in the center of the barrier, delivering added strength and stability.

SUMMARY OF ROADGUARD/2 FEATURES

The ROADGUARD/2 is Stronger, More Resilient, Lighter in Weight, and Less Expensive than rotationally molded barriers using low-density polyethylene.

• Easy to handle, quick to install, 6-feet long, 3.5-feet high,
  2-feet wide at base
• Weighs ONLY 85 lbs. empty, and a secure 1,600 lbs. when filled with water
• Patented locking design keeps barriers firmly connected. Locks with all ROADGUARD/2, ROADGUARD and OTW MB 350 barriers.
• Two (2) fill caps, four (4) drain plugs
• Fork lift slots, hand grips, and positions for lights and screens
• Barriers curve up to 15 degrees in each direction at each connection
• Manufactured with UV inhibitors
• Available in orange, white, and mixed orange/white colors

ROADGUARD/2 barriers can be purchased without our Locking Ramp device. Without the device, they will nest with barriers made by Armorcast (Guardian™), Remcon (Guardsafe™), Creative Building Products (Safety Barricade), Off the Wall (MB JSS barriers), among others.

Our locking devices can be purchased separately and added to ROADGUARD/2 barriers at a later date.

MULTIPLE OPTIONS FOR SECURITY AND TRAFFIC CONTROL

ROADGUARD/2 is compatible with the RoadGuard Corner Connector Barrier, which allows for left or right angle turns of 75° to 105°, while locking the barriers together. The Corner is 2.5 ft. long, 2.5 ft. wide and 3.5 ft high, and weighs 50 lbs. empty and 550 lbs. when filled with water.