ROADGUARD Fence Panels are used for perimeter security, safety, crowd control and general site protection.
These 6' x 4' chain link fence panel units install firmly on a ROADGUARD/2 barrier to give a stable 8 foot high continuous, unbroken protective fence for all security and safety needs.
|
|
Barriers curve up to 15° in either direction at each connection.
|
|
|
|
Features & Advantages
|
- Single unit construction — one-piece solid-frame units for
easy, quick installation
- Each 6' x 4' chain link panel has a solid frame and fork-like
connections that are gusseted for added strength and durability
that connect to the barrier by bolt through tubular channels in
the barrier.
- All hardware included
- Adjoining panels bracket together for continuous, unbroken,
rigid security line.
- Curves, angles and turns — By using the ROADGUARD Corner Connection Barrier and our 1'5" x 4' chain
link panel unit which brackets to adjoining 6' x 4' panels, you can
build a security wall that meets every perimeter configuration.
|
|
The 1'5" x 4' Security Panel is used in conjunction with the Corner Connector. This adds additional security for curved or cornered perimeters. This easily brackets to adjoining 6' x 4' panels.
|
Personnel Gate
Gates for entry and egress are easily installed along a security perimeter. The personnel gate is designed to be
the width of one ROADGUARD/2 barrier. In this way, gates can be removed, replaced with a barrier, and transferred to another
location simply by removing other barriers and screens along the line and re-installing the gate and locking poles at the
new location. When installed, the personnel gate is 60 inches wide and 90 inches high.
|
|
|
Vehicle Gate
This easily installed gate allows trucks
and other vehicles up to 10½ feet
wide to pass through the perimeter.
The vehicle gate unit is designed to
the width of two ROADGUARD/2
barriers. In this way, the vehicle gates
can be removed, replaced with other
barriers, and transferred to another
location simply by removing the
barriers and screens along the line
and re-installing the gates and locking
poles at the new location. When
installed, the gate is 129¼ inches
wide and 90 inches high.
|
|
|
ROADGUARD Personnel and Vehicle Gates
are packaged and shipped with all of the
necessary hardware, including poles, clamps,
and locking bars required for attachment to
ROADGUARD/2 barriers and screen panels.
|
